Video Transcript for Review of Stealth Hitches Towing Kit with Ball Mount and Trailer Wiring - SH99FR

Hello, neighbors. Steven here with etrailer.com. Let's take a look at our Towing Kit with Ball Mount and included Trailer Wiring for your Stealth Hitches and a two inch Ball. Now folks, this does fit a couple different year, make, and models, so make sure you're checking our fit guide here at etrailer.com. Enter on our homepage where it says Vehicle Information, year, make, and model, and that kind of information that it asks you for. Now getting into it, folks, this complete kit here in front of you will let you use your Stealth Hitch Rack Receiver that's sold separately for towing.

And I'll put those two item numbers up on the screen that this works with for those vehicles. The detachable ball is gonna lock up into place onto the receiver attachment that you have on those hitches, and mount securely to then let you have a nice connection point for your trailer's ball coupler. It's gonna attach and lock in place, which is also gonna eliminate rattle and play and those kind of things. Again, it's a two inch ball. And you're gonna get a nice black powder coat finish on it like you see here, and it's gonna resist corrosion and rust and those kind of things.

Just the same with the mounting brackets for the wire and the safety chain tie down points here that are included. You're gonna get all the mounting hardware, zip ties, the wiring connectors, both the 7-way flat and the adapter to go from 7-way down to the 4-pole. That simply plugs in. And as you can see, the lid will actually lock in place there as well. The way, it doesn't come unattached.

You just simply lift it up to attach it, and then this would obviously mount into the mounting bracket, however you choose to hang it off of your hitch. But I would follow the instructions. They got pictures and instructions there to make it much easier for you. You're also gonna get the wire, it's gonna connect to the battery. You're gonna have an inline fuse.

You're gonna have all the long wires you need to run the length of the connection points. You are gonna get this connection module here that's gonna give you a nice, correct output at the back for all your signals on the trailer. And it's also gonna avoid overloading your vehicle's electrical system. Now as far as some measurements, again, a two inch ball. This is rated for up to 8,000 pounds towing capacity. And whenever you're using hitch number SH44FR, from the ground to the top of this ball, you're gonna have 18 inches. Now from the center of the ball to the center of the peg is 10 inches center to center. The total length overall is 13 inches long. It's three quarters of an inch thick here on this bottom plate, so it's very, very beefy and strong. And it's a one inch shank or one inch hole on the ball diameter if for some reason you ever have to change that out or do something different there. Folks, it looks like Stealth Hitch has given you a limited lifetime warranty with this product, so that's very impressive as well. If you ever have any issues in the future, you could contact them directly and they'll take care of you. Well that will wrap it up for our quick look today at this Towing Kit with the Ball Mount and Trailer Wiring for your Stealth Hidden Hitches. I'm Steven. Thanks for watching, and stay safe.